Begin the frame by adding 3 of the listed blocks in a straight line across. Refer to the picture.
-Size Large
Begin the frame by adding 9 of the listed blocks in a straight line across. Refer to the picture.
Step 3: Finish the Frame
-Size Small
Finish the frame by adding 3 blocks to all 3 remaining sides. Refer to the picture.
-Size Large
Finish the frame by adding 9 blocks to all 3 remaining sides. Refer to the picture.
Step 4: Finish the Size Small Beacon, Continue the Size Large Frame
-Size Small
Fill in the last block and add the beacon on top. Refer to the picture.
-Size Large
Put a 7x7 new frame one block over but inside the 9x9 old frame. Refer to the picture.
Step 5: Continue the Frame for Size Large
-Size Large
Add a 5x5 one block over but inside the 7x7 frame. Refer to the picture.
Step 6: Finish the Frame for Size Large
-Size Large
Add a 3x3 frame one block over but inside the 5x5 frame. Then fill inside the one block hole, and then add the Beacon. Refer to the picture.
Step 7: How to Draw Power Out of the Beacon
Take your Netherite Ingot or your Gold or Iron Ingot or your diamond or emerald, and place it into the empty spot on the left. Then press the power you choose, and press the checkmark and then you will notice a power on the top of your left screen. Refer to the pictures.
Thank You For Reading!!
If you wanna see more Minecraft tutorials, check out WolfxZ39!
After you have your square/pyramid, place the beacon in the middle of the square, and grab a spare iron ingot, gold ingot, netherite ingot, diamond, or emerald to put in. ...
When you have the beacon on top of the square, right click the beacon and select an effect, put your other valuable in, and left click the checkmark.
To reach the maximum power of the beacon, it should ideally have four levels built, with the beacon placed on top, in the center block of a 3x3 area, which is the top layer of the beacon base.
To light up a beacon needs two things, a base and sky access. The base has to be at least a 3x3 square made of blocks of iron, diamond, gold, emerald or netherite with the beacon placed on top of the square's center.
Beacons. Blocks of netherite can be used to power a beacon. The beacon can be powered by a 3×3 square of netherite blocks underneath it, and can also optionally include a 5×5, 7×7 and 9×9 layer in the shape of a pyramid under the original layer to increase the effects from the beacon.
Introduction: My name is Errol Quitzon, I am a fair, cute, fancy, clean, attractive, sparkling, kind person who loves writing and wants to share my knowledge and understanding with you.
We notice you're using an ad blocker
Without advertising income, we can't keep making this site awesome for you.
